PAGE
Modular Touch Hd Vpro — product pageDesigned page · specs & gallery
Overview
Modular Touch HD RPro
The Modular Touch HD RPro is Beakn's heavy-duty capacitive touch switch module designed for higher-load applications. It snaps directly into any ROMA-format modular plate — replacing the existing mechanical switch module — so your plate, your wall box, and your wiring stay exactly as they are. Like every Beakn Modular Touch variant, it connects over WiFi (no hub required), responds to touch, app, voice, and NFC, and runs all 20 smart features with no subscription fee.
The RPro designation means it uses ROMA-format plate-locking, making it compatible with Anchor Roma, Legrand Myrius, GM Modular, Havells Crabtree, and 25+ other ROMA-compatible Indian plate brands. If your plates are from Schneider (Vihan / ZENcelo), choose the VPro variant instead — specs and features are identical.
The HD variant is specifically chosen when higher or more demanding loads are involved.
Compatibility
Compatibility
The RPro designation means it uses ROMA-format plate-locking, making it compatible with Anchor Roma, Legrand Myrius, GM Modular, Havells Crabtree, and 25+ other ROMA-compatible Indian plate brands.
If your plates are from Schneider (Vihan / ZENcelo), choose the VPro variant instead — specs and features are identical.
Mixing Smart and Non-Smart Modules
You can place the Modular Touch HD RPro alongside non-smart modules in the same plate. Upgrade one switch at a time — no need to replace the entire plate at once.
Typical Use Cases
•Geysers / water heaters — high resistive load; pair with auto-off timer for safety
•Air conditioners (direct switch control) — high inductive loads up to 400W
•High-wattage incandescent or resistive loads — up to 800W per channel
•Workshop or utility room lighting — heavy-duty, frequent-use environments
•Any circuit where a standard module may be under-rated — upgrade to HD for peace of mind
•New builds or renovations — install once, control forever without changing plates
Specifications
| Product | Modular Touch HD RPro |
|---|---|
| Type | Heavy-duty capacitive touch switch module |
| Plate format | RPro — ROMA-format plates |
| Touch technology | Capacitive — 100,000 switching cycles |
| Operating voltage | 110–250V AC, 50/60Hz |
| Neutral wire | Required at switchboard |
| Max load — incandescent / resistive | 800W per channel |
| Max load — LED | 100W or 5 units per channel |
| Max load — inductive | 400W per channel |
| Standby power | < 0.8W |
| Surge protection | 2.5KV rated; tested up to 4KV |
| LED status indicator | Customizable ON/OFF colours via app; brightness 0–100% |
| Night Mode | Auto-dims LED indicators after a set time |
| Module dimensions | 50 × 50 × 49mm |
| Connectivity | WiFi — no hub needed |
| Offline control | Yes — touch panel, schedules, and timers work without internet |
| Voice assistants | Google Assistant, Amazon Alexa, Apple Siri |
| App features | 20 features, included free — no subscription |
| Warranty | 3 years |
| Free installation | Available in 8 cities |
Capacitive touch panel — no moving parts, no mechanical wear; rated 100,000 switching cycles (≈13+ years at 20 uses/day)
Multi-mode control — touch panel, Beakn app, voice commands, NFC tags, home-screen shortcuts, and Siri Shortcuts
WiFi direct — no hub, no bridge; connects straight to your home router
Set different colours for ON and OFF states per channel (e.g. green = light on, red = geyser on, blue = fan on)
Adjustable brightness 0–100%
Night Mode — automatically dims all indicators after a user-set time so nothing glows during sleep
Schedules — turn loads on/off at set times
Auto-off timers — trigger even when switched on at the panel (great for geysers, exhaust fans)
Countdown timers
Sunrise/sunset triggers — location-aware automatic scheduling
Routines & scenes — group multiple devices into single commands
Sensor workflows & scene-trigger conversion
Safe Mode voltage protection — auto-disconnects enrolled loads if voltage goes above 280V or below 200V
Lock Room with alerts — restrict and monitor access to specific circuits
Full offline mode — schedules and timers keep running locally without internet
Running-hours tracking per channel
Estimated energy cost monitoring
ON/OFF history log
Intelligent reminders (e.g. geyser left on alerts)
Google Assistant — "Hey Google, turn off the AC"
Amazon Alexa — works with Alexa routines
Apple Siri — Siri Shortcuts supported
NFC tag control — tap a tag to trigger scenes
Installation
Installation & Wiring
What You Need Before Installing
1.A ROMA-format modular plate — Anchor Roma, Legrand Myrius, GM Modular, Havells Crabtree, or any of 25+ ROMA-compatible Indian brands
2.A neutral wire available at the switchboard — required on all Modular Touch variants; confirm with your electrician before purchase
3.A 2.4GHz WiFi network — no hub required
Installation Process
1.Switch off the MCB for the circuit being worked on
2.Remove the existing mechanical switch module from the ROMA plate — the plate and wiring stay in place
3.Connect the Beakn Modular Touch HD RPro module to the existing wiring (Live, Neutral, Load)
4.Snap the module into the ROMA plate using the ROMA plate-locking mechanism
5.Restore power and follow the in-app setup to connect to WiFi and configure channels
6.Customise LED colours, Night Mode, and schedules in the Beakn app
> No new wiring, no new plates, no wall cutting required.
> Free installation is available in 8 cities — Beakn-certified electricians handle the full process.
Wiring Requirements Summary
| Requirement | Detail |
|---|---|
| Neutral wire | Mandatory — must be present at the switchboard |
| Live wire | Standard |
| Load connection | Per channel |
| Earthing | Follow local electrical standards |
| Voltage range | 110–250V AC, 50/60Hz |
User Manual
Manual
Operating Notes
•The touch panel works directly on the device.
•Schedules and timers work without internet.
•Local app control works over WiFi.
•Remote access (controlling the switch when you are away from home) requires an active internet connection.
•You can use touch panel, Beakn app, voice commands, NFC tags, home-screen shortcuts, and Siri Shortcuts for control.
LED Indicators
•Set different ON and OFF colours per channel.
•Adjust indicator brightness from 0–100%.
•Night Mode automatically dims the LEDs after a user-set time.
Safety Features
•Safe Mode voltage protection automatically disconnects enrolled loads if supply voltage goes above 280V or below 200V.
•Lock Room with alerts can restrict and monitor access to specific circuits.
Monitoring
•Running-hours tracking per channel
•Estimated energy cost monitoring
•ON/OFF history log
•Intelligent reminders such as geyser-left-on alerts
Configuration
Configuration
After restoring power, follow the in-app setup to connect to WiFi and configure channels.
You can also customise LED colours, Night Mode, and schedules in the Beakn app.
The module supports:
•Schedules
•Auto-off timers
•Countdown timers
•Sunrise/sunset triggers
•Routines & scenes
•Sensor workflows & scene-trigger conversion
•Safe Mode voltage protection
•Lock Room with alerts
•Running-hours tracking
•Estimated energy cost monitoring
•ON/OFF history log
•Intelligent reminders
•NFC tag control
•Google Assistant
•Amazon Alexa
•Apple Siri
All 20 app features are included free with no subscription.
Troubleshooting
Troubleshooting
Power and Connectivity
•The device connects over WiFi and does not require a hub.
•Offline control is supported: the touch panel, schedules, and timers work without internet.
•Local app control works over WiFi.
•Remote access requires an active internet connection.
Wiring
•A neutral wire is required at the switchboard.
•The installation uses Live, Neutral, Load wiring.
•Follow local electrical standards for earthing.
Load and Safety
•The module is designed for higher or more demanding loads.
•Maximum loads per channel are:
•800W per channel for incandescent / resistive
•100W or 5 units per channel for LED
•400W per channel for inductive
•Safe Mode voltage protection auto-disconnects enrolled loads if voltage goes above 280V or below 200V.
•Surge protection is 2.5KV rated; tested up to 4KV.
Fitment
•The RPro version is for ROMA-format plates.
•If your plates are Schneider (Vihan / ZENcelo), choose VPro instead.
FAQ
Q: What is the "HD" in Modular Touch HD?
The HD (Heavy Duty) variant is designed for higher-load circuits — up to 800W for resistive/incandescent loads and up to 400W for inductive loads per channel — where extra load-handling capacity is needed compared to standard touch switch variants.
Q: What is the difference between RPro and VPro?
Functionally identical — same specs, same features, same app, same voice support. The only difference is the plate-locking mechanism. RPro fits ROMA-format plates (Anchor Roma, Legrand Myrius, GM Modular, Havells Crabtree, and 25+ Indian brands). VPro fits Vihan-format plates (Schneider Vihan, Schneider ZENcelo). Choose based on your existing plate brand.
Q: How do I know if I need RPro or VPro?
Simple rule: Anchor / Legrand / GM / Havells → RPro. Schneider → VPro. If unsure, check your plate brand and match accordingly.
Q: Does it require a neutral wire?
Yes — a neutral wire must be available at the switchboard. This applies to all Modular Touch variants without exception. Most Indian switchboards already have a neutral; your electrician will confirm during installation.
Q: Does it work without internet?
Yes. The touch panel always works. Schedules, auto-off timers, and countdown timers run locally on the device. Local app control works over WiFi. Only remote access (controlling the switch when you are away from home) requires an active internet connection.
Q: Will I need to replace my existing plate?
No. The Modular Touch HD RPro snaps into your existing ROMA-format plate. Your plate, wall box, and wiring remain unchanged.
Q: Can I mix it with non-smart modules in the same plate?
Yes — combine the HD RPro with non-smart mechanical modules or any ROMA-compatible mechanisms in the same plate. You can go smart gradually, one module at a time.
Q: How long does the touch panel last?
The capacitive panel is rated for 100,000 switching cycles with no mechanical parts to wear out. At 20 uses per day, that exceeds 13 years of reliable operation.
Q: Is there a subscription fee for the smart features?
No. All 20 app features — schedules, automations, energy monitoring, Safe Mode, voice control, NFC, and more — are included permanently with no subscription.
Q: What surge protection does it have?
The module is rated at 2.5KV and tested up to 4KV for surge protection, guarding against voltage spikes common in Indian power networks.
Q: What is Safe Mode?
Safe Mode is a voltage protection feature. When enabled, the module automatically disconnects enrolled loads if the supply voltage rises above 280V or drops below 200V, protecting your appliances from unsafe voltage conditions.
Q: What is Night Mode?
Night Mode automatically dims the LED status indicators on the touch panel after a user-configured time. This prevents the panel from glowing brightly during sleeping hours while still providing a low-level indicator.