PAGE
Modular Touch 4 Rpro — product pageDesigned page · specs & gallery
PHOTO
4 Touch
Overview
Modular Touch 4 RPro
The Modular Touch 4 RPro is a 4-channel capacitive touch switch module from Beakn. It replaces your existing 4-gang mechanical switch module by snapping directly into any ROMA-format modular plate — no new plate, no new wiring, no hub. Four touch-sensitive buttons give you independent smart control over four separate lights or loads, all from the panel, the Beakn app, your voice, or an NFC tag.
The RPro designation means it is built for ROMA-format plates: Anchor Roma, Legrand Myrius, GM Modular, Havells Crabtree, and 25+ other ROMA-compatible Indian brands. For Schneider Vihan / ZENcelo plates, the functionally identical Modular Touch 4 VPro is the correct choice.
Features
All 20 features are included free with no subscription.
Automation
•Schedules — turn any of the 4 channels on/off at a set time, every day or on selected days
•Auto-off timers — trigger even when the load is switched on at the panel (e.g. geyser auto-off after 30 minutes)
•Countdown timers — count down from a set duration
•Sunrise / sunset triggers — location-aware on/off scheduling
•Routines & scenes — group multiple channels or devices into a single action
•Scene-trigger conversion — use a touch button to trigger a multi-device scene instead of switching a single load
•Sensor workflows — integrate with compatible sensors
Safety
•Safe Mode voltage protection — auto-disconnects enrolled loads if voltage goes above 280V or below 200V
•Lock Room with alerts — restrict and monitor access per channel
•Full offline mode — schedules, timers, and the touch panel work with no internet
Monitoring
•Running-hours tracking — per channel; know how long each load has been on
•Estimated energy cost — per channel usage
•ON/OFF history — log of activity per channel
•Intelligent reminders — usage-based alerts (e.g. geyser left on)
Convenience
•Siri Shortcuts — iOS home-screen or voice shortcuts
•Google Assistant & Amazon Alexa — voice on/off and scene control
•NFC tag control — tap a phone to an NFC tag to trigger any channel or scene
•Home-screen shortcuts — quick access from phone
•Control via touch panel, app, voice, and NFC — four independent control paths
LED Status Panel
•Set different colours for ON and OFF states per channel (e.g. green = bedroom light on; red = geyser on; blue = fan on)
•Adjust LED brightness 0–100% per channel
•Night Mode — auto-dims all LED indicators after a set time so nothing glows during sleep
Use Cases
| Room / Scenario | How the Modular Touch 4 RPro helps |
|---|---|
| Living room | Control ceiling light, floor lamp, fan circuit, and accent light from one 4-button panel |
| Master bedroom | Channel 1: main light; Channel 2: bedside lamp; Channel 3: ceiling fan circuit; Channel 4: geyser — with auto-off timer on the geyser |
| Kitchen | Exhaust fan, counter light, main light, and appliance socket, all scheduled and monitored for running hours |
| Home office | Scene-trigger on one button fires "work mode" (multiple lights/devices); other channels handle individual loads |
| Retrofit upgrade | Replace only the 4-gang module; keep the existing Anchor Roma or Legrand Myrius plate; mix with non-smart modules in the same plate |
What's in the box
What you need
•An existing ROMA-format modular plate (Anchor Roma, Legrand Myrius, GM Modular, Havells Crabtree, or any of 25+ ROMA-compatible Indian brands)
•A neutral wire available at the switchboard — required; your electrician confirms this during installation
•A 2.4GHz WiFi network (no hub or bridge required)
Compatibility
Compatibility
The RPro designation means it is built for ROMA-format plates: Anchor Roma, Legrand Myrius, GM Modular, Havells Crabtree, and 25+ other ROMA-compatible Indian brands.
For Schneider Vihan / ZENcelo plates, the functionally identical Modular Touch 4 VPro is the correct choice.
FAQ
Q: What does "4 RPro" mean?
The "4" is the number of touch channels (four independent buttons / loads). "RPro" means it uses ROMA-format plate-locking — compatible with Anchor Roma, Legrand Myrius, GM Modular, Havells Crabtree, and 25+ other ROMA-compatible Indian plate brands.
Q: What's the difference between RPro and VPro?
Functionally identical — same specs, same 20 features. RPro locks into ROMA-format plates; VPro locks into Vihan-format plates (Schneider Vihan, Schneider ZENcelo). Choose by your existing plate brand: Anchor / Legrand / GM / Havells → RPro; Schneider → VPro.
Q: Can I mix smart and non-smart modules in the same plate?
Yes. Install the Modular Touch 4 RPro in one position and keep any standard ROMA-compatible non-smart module in another position of the same plate. Upgrade one module at a time.
Specifications
| Channels / touch buttons | 4 independent channels |
|---|---|
| Touch technology | Capacitive — 100,000 switching cycles |
| Operating voltage | 110–250V AC, 50/60Hz |
| Neutral wire | Required at switchboard |
| Max load — incandescent / resistive | 800W per channel |
| Max load — LED | 100W or 5 LED units per channel |
| Max load — inductive | 400W per channel |
| Standby power | < 0.8W |
| Surge protection | 2.5KV rated; tested up to 4KV |
| Module dimensions | 50 × 50 × 49mm |
| Plate series | RPro (ROMA-format plates) |
| Connectivity | WiFi — no hub required |
| Offline control | Yes — touch, schedules, and timers work without internet |
| Voice assistants | Google Assistant, Amazon Alexa, Apple Siri |
| LED status indicators | Customizable ON/OFF colours; brightness 0–100%; Night Mode |
| App features | 20 features included free — no subscription |
| Warranty | 3 years |
| Free installation | Available in 8 cities |
Installation
Installation & Wiring
Installation steps (overview)
1.Switch off the MCB for the circuit being worked on.
2.Remove the existing 4-gang mechanical module from the ROMA plate — the plate and back-box remain in place.
3.Connect wiring to the Beakn Modular Touch 4 RPro module: Live (L), Neutral (N), and the four Load outputs (one per channel). The module dimensions are 50 × 50 × 49mm and fit the standard ROMA module bay.
4.Snap the module into the ROMA plate — the RPro locking mechanism aligns with ROMA-format plate tabs.
5.Restore power and follow the Beakn app for WiFi pairing and channel naming.
6.Configure LED colours, Night Mode, schedules, and Safe Mode voltage protection in the app.
Wiring notes
•Neutral is mandatory — do not attempt installation without a neutral at the switchboard. All four channels share the module's neutral connection.
•Max load per channel: 800W resistive/incandescent; 100W or 5 units LED; 400W inductive. Do not exceed these per-channel limits.
•Standby draw is less than 0.8W — negligible on your electricity bill.
•Surge protection is built in: rated 2.5KV, tested to 4KV — no external surge device needed at the module level.
•You can mix this smart module with non-smart modules in the same ROMA plate (e.g. install the Modular Touch 4 in position 1 and keep a standard non-smart module in position 2 of the same plate).
Free installation
Available in 8 cities — check Beakn's website for the current city list; a trained installer will confirm neutral availability and complete wiring.
User Manual
Installation & Wiring
What you need
•An existing ROMA-format modular plate (Anchor Roma, Legrand Myrius, GM Modular, Havells Crabtree, or any of 25+ ROMA-compatible Indian brands)
•A neutral wire available at the switchboard — required; your electrician confirms this during installation
•A 2.4GHz WiFi network (no hub or bridge required)
Installation steps (overview)
1.Switch off the MCB for the circuit being worked on.
2.Remove the existing 4-gang mechanical module from the ROMA plate — the plate and back-box remain in place.
3.Connect wiring to the Beakn Modular Touch 4 RPro module: Live (L), Neutral (N), and the four Load outputs (one per channel). The module dimensions are 50 × 50 × 49mm and fit the standard ROMA module bay.
4.Snap the module into the ROMA plate — the RPro locking mechanism aligns with ROMA-format plate tabs.
5.Restore power and follow the Beakn app for WiFi pairing and channel naming.
6.Configure LED colours, Night Mode, schedules, and Safe Mode voltage protection in the app.
Wiring notes
•Neutral is mandatory — do not attempt installation without a neutral at the switchboard. All four channels share the module's neutral connection.
•Max load per channel: 800W resistive/incandescent; 100W or 5 units LED; 400W inductive. Do not exceed these per-channel limits.
•Standby draw is less than 0.8W — negligible on your electricity bill.
•Surge protection is built in: rated 2.5KV, tested to 4KV — no external surge device needed at the module level.
•You can mix this smart module with non-smart modules in the same ROMA plate (e.g. install the Modular Touch 4 in position 1 and keep a standard non-smart module in position 2 of the same plate).
Configuration
Overview
The Modular Touch 4 RPro is a 4-channel capacitive touch switch module from Beakn. It replaces your existing 4-gang mechanical switch module by snapping directly into any ROMA-format modular plate — no new plate, no new wiring, no hub. Four touch-sensitive buttons give you independent smart control over four separate lights or loads, all from the panel, the Beakn app, your voice, or an NFC tag.
The RPro designation means it is built for ROMA-format plates: Anchor Roma, Legrand Myrius, GM Modular, Havells Crabtree, and 25+ other ROMA-compatible Indian brands. For Schneider Vihan / ZENcelo plates, the functionally identical Modular Touch 4 VPro is the correct choice.
Features
All 20 features are included free with no subscription.
Automation
•Schedules — turn any of the 4 channels on/off at a set time, every day or on selected days
•Auto-off timers — trigger even when the load is switched on at the panel (e.g. geyser auto-off after 30 minutes)
•Countdown timers — count down from a set duration
•Sunrise / sunset triggers — location-aware on/off scheduling
•Routines & scenes — group multiple channels or devices into a single action
•Scene-trigger conversion — use a touch button to trigger a multi-device scene instead of switching a single load
•Sensor workflows — integrate with compatible sensors
Safety
•Safe Mode voltage protection — auto-disconnects enrolled loads if voltage goes above 280V or below 200V
•Lock Room with alerts — restrict and monitor access per channel
•Full offline mode — schedules, timers, and the touch panel work with no internet
Monitoring
•Running-hours tracking — per channel; know how long each load has been on
•Estimated energy cost — per channel usage
•ON/OFF history — log of activity per channel
•Intelligent reminders — usage-based alerts (e.g. geyser left on)
Convenience
•Siri Shortcuts — iOS home-screen or voice shortcuts
•Google Assistant & Amazon Alexa — voice on/off and scene control
•NFC tag control — tap a phone to an NFC tag to trigger any channel or scene
•Home-screen shortcuts — quick access from phone
•Control via touch panel, app, voice, and NFC — four independent control paths
LED Status Panel
•Set different colours for ON and OFF states per channel (e.g. green = bedroom light on; red = geyser on; blue = fan on)
•Adjust LED brightness 0–100% per channel
•Night Mode — auto-dims all LED indicators after a set time so nothing glows during sleep
Reset
FAQ
Q: What is Safe Mode?
Safe Mode is a voltage protection feature. When enabled, the module automatically disconnects its enrolled loads if voltage goes above 280V or below 200V.
Troubleshooting
FAQ
Q: Does it work if the internet goes down?
Yes. The four touch buttons always work. Schedules, auto-off timers, and countdown timers all run locally on the module. Local app control works over your home WiFi. Only remote access (controlling the switch from outside your home network) needs an internet connection.
Q: How long will it last?
The capacitive panel is rated for 100,000 switching cycles per channel — no mechanical parts to wear out. At ~20 uses a day per channel, that is over 13 years of life.
Q: Can I control each of the 4 channels independently?
Yes — each channel has its own touch button, LED indicator, schedule, timer, running-hours log, and load limit. They are fully independent.
FAQ
Q: What does "4 RPro" mean?
The "4" is the number of touch channels (four independent buttons / loads). "RPro" means it uses ROMA-format plate-locking — compatible with Anchor Roma, Legrand Myrius, GM Modular, Havells Crabtree, and 25+ other ROMA-compatible Indian plate brands.
Q: What's the difference between RPro and VPro?
Functionally identical — same specs, same 20 features. RPro locks into ROMA-format plates; VPro locks into Vihan-format plates (Schneider Vihan, Schneider ZENcelo). Choose by your existing plate brand: Anchor / Legrand / GM / Havells → RPro; Schneider → VPro.
Q: Does it need a neutral wire?
Yes — a neutral wire must be present at the switchboard. This applies to all Beakn Modular Touch variants. Most Indian switchboards already have a neutral; your electrician or Beakn installer will confirm before fitting.
Q: Does it work if the internet goes down?
Yes. The four touch buttons always work. Schedules, auto-off timers, and countdown timers all run locally on the module. Local app control works over your home WiFi. Only remote access (controlling the switch from outside your home network) needs an internet connection.
Q: How long will it last?
The capacitive panel is rated for 100,000 switching cycles per channel — no mechanical parts to wear out. At ~20 uses a day per channel, that is over 13 years of life.
Q: Can I control each of the 4 channels independently?
Yes — each channel has its own touch button, LED indicator, schedule, timer, running-hours log, and load limit. They are fully independent.
Q: Can I mix smart and non-smart modules in the same plate?
Yes. Install the Modular Touch 4 RPro in one position and keep any standard ROMA-compatible non-smart module in another position of the same plate. Upgrade one module at a time.
Q: What LED loads can I connect?
Up to 100W or 5 LED units per channel — whichever limit is reached first. For incandescent or resistive loads the limit is 800W per channel; for inductive loads (motors, transformers) it is 400W per channel.
Q: Is there a subscription fee for app features?
No. All 20 app features are included free for life — no monthly or annual subscription.
Q: What is Night Mode?
Night Mode automatically dims the LED status indicators on the panel after a time you set in the app. So the switch glows normally during the day but does not light up your bedroom at 2 AM.
Q: What is Safe Mode?
Safe Mode is a voltage protection feature. When enabled, the module automatically disconnects its enrolled loads if voltage goes above 280V or below 200V.