PAGE
Modular Touch 2 Vpro — product pageDesigned page · specs & gallery
Overview
Modular Touch 2 Vpro
The Modular Touch 2 RPro is a 2-channel capacitive touch switch module from Beakn. It replaces an existing mechanical switch module by snapping directly into any ROMA-format modular plate — no new plate, no new wiring, no hub.
Two touch-sensitive buttons provide smart control over two independent loads through app, voice, touch, or schedule, even without an internet connection.
The RPro suffix means it is engineered for ROMA-format plates — the plate-locking standard used by Anchor Roma, Legrand Myrius, GM Modular, Havells Crabtree, and 25+ other Indian modular plate brands. If your plate is from one of these brands, the RPro snaps straight in. For Schneider Vihan or ZENcelo plates, the functionally identical VPro variant applies.
What's in the box
No contents provided in the knowledge bank.
Compatibility
Compatibility
•Works with ROMA-format modular plates.
•The RPro suffix is for ROMA-format plates used by Anchor Roma, Legrand Myrius, GM Modular, Havells Crabtree, and 25+ other Indian modular plate brands.
•For Schneider Vihan or ZENcelo plates, the functionally identical VPro variant applies.
•If your switches are from Anchor, Legrand, GM Modular, or Havells Crabtree, your plate is almost certainly ROMA-format → choose RPro.
•If you have Schneider switches, choose VPro.
•Any ROMA-compatible mechanism works alongside it.
•You can install the Modular Touch 2 RPro in one slot of a multi-gang plate while keeping non-smart mechanical modules in the remaining slots.
•Supports Google Assistant, Amazon Alexa, and Apple Siri.
•Supports control by touch, voice, app, and NFC.
•Offline control is supported: the touch panel, schedules, and timers work without internet.
•Local app control works as long as your phone and the module are on the same WiFi network.
•Only remote access (controlling the switch from outside your home network) requires an active internet connection.
Specifications
| Channels | 2 (two independent touch buttons / loads) |
|---|---|
| Touch technology | Capacitive — 100,000 switching cycles |
| Operating voltage | 110–250V AC, 50/60Hz |
| Neutral wire | Required (must be available at the switchboard) |
| Max load — incandescent / resistive | 800W per channel |
| Max load — LED | 100W or 5 units per channel |
| Max load — inductive | 400W per channel |
| Standby power | < 0.8W |
| Surge protection | 2.5KV rated; tested up to 4KV |
| LED status indicators | Customizable ON/OFF colours via app; brightness 0–100%; Night Mode auto-dims after set time |
| Module dimensions | 50 × 50 × 49mm |
| Connectivity | WiFi — no hub required |
| Offline control | Yes — touch panel, schedules, and timers work without internet |
| Voice assistants | Google Assistant, Amazon Alexa, Apple Siri |
| App features | 20 features included free — no subscription |
| Plate format | RPro — ROMA-format plates |
| Warranty | 3 years |
| Free installation | Available in 8 cities |
All 20 app features are included free — no subscription, no tier.
Schedules — turn loads on/off at set times
Auto-off timers — fire even when the switch was turned on at the panel
Countdown timers
Sunrise / sunset triggers — time-based rules tied to local daylight
Routines and scenes — group actions across devices
Sensor workflows — trigger based on sensor inputs
Scene-trigger conversion
Safe Mode voltage protection — auto-disconnects enrolled loads if voltage rises above 280V or drops below 200V
Lock Room with alerts — restrict access and receive notifications
Full offline mode — schedules and touch continue working without any internet
Running-hours tracking — per channel
Estimated energy cost
ON/OFF history
Intelligent reminders
Siri Shortcuts
Google Assistant
Amazon Alexa
NFC tag control
Home-screen shortcuts
Responds to touch, voice, app, and NFC
Set different colours for the ON state and OFF state of each channel independently (e.g. green = bedroom light on; red = geyser on)
Adjust indicator brightness from 0–100%
Night Mode — after a user-defined time, LEDs auto-dim so nothing glows during sleep
Installation
Installation & Wiring
1.Switch off the MCB for the circuit at your distribution board.
2.Remove the existing mechanical switch module from the ROMA-format plate — the plate itself stays in place.
3.Connect the wiring to the Beakn module terminals (live, neutral, and load per channel). A neutral wire must be present and accessible at the switchboard.
4.Snap the Modular Touch 2 RPro into the plate using the ROMA plate-locking mechanism.
5.Restore power, connect to the Beakn app over WiFi, and configure.
Wiring requirements
•Neutral wire is mandatory at the switchboard for all Modular Touch variants, including the Touch 2 RPro.
•Most Indian residential switchboards already carry a neutral; an electrician confirms availability during installation.
•No extra wiring, no hub wiring, no additional bus lines needed — the module connects over standard home WiFi.
Load limits to respect during wiring
| Load type | Max per channel |
|---|---|
| Incandescent / resistive | 800W |
| LED | 100W or 5 units |
| Inductive | 400W |
> Note: The Modular Touch 2 is a switching module — it turns loads fully on or off. For fan speed control, use the Modular Touch Fan Dimmer. For LED dimming, use the Modular Touch Triac Dimmer.
Mixing smart and non-smart modules
You can install the Modular Touch 2 RPro in one slot of a multi-gang plate while keeping non-smart mechanical modules in the remaining slots. Any ROMA-compatible mechanism works alongside it. Upgrade one switch at a time — no need to replace the whole plate at once.
Free installation
Available in 8 cities — confirm availability in your city at checkout or on the Beakn website.
User Manual
Manual
How it works
The module gives smart control over two independent loads through app, voice, touch, schedule, and NFC. It is designed to be used with a ROMA-format modular plate and connects over WiFi with no hub required.
Operating behavior
•The touch panel always works regardless of internet status.
•Schedules and auto-off timers run locally on the device — they don't need the cloud.
•Local app control works when your phone and the module are on the same WiFi network.
•Only remote access from outside your home network requires an active internet connection.
•Both channels are fully independent and can have different schedules, different LED colours, different auto-off timers, and different voice-command names.
LED indicators
•LED indicators can be set to different colours for the ON state and OFF state of each channel independently.
•Indicator brightness can be adjusted from 0–100%.
•Night Mode automatically dims the LED indicators after a user-defined time.
Switching behavior
•The Modular Touch 2 is a switching module — it turns loads fully on or off.
•For fan speed control, use the Modular Touch Fan Dimmer.
•For LED dimming, use the Modular Touch Triac Dimmer.
Safety behavior
•Safe Mode voltage protection auto-disconnects enrolled loads if voltage rises above 280V or drops below 200V.
•Surge protection is 2.5KV rated and tested up to 4KV.
Configuration
Configuration
App and connectivity
After restoring power, connect to the Beakn app over WiFi and configure the module.
Supported control methods
•Touch
•Voice
•App
•NFC
•Schedules
•Timers
Voice assistant setup
Supports:
•Google Assistant
•Amazon Alexa
•Apple Siri
•Siri Shortcuts
LED settings
•Set different colours for the ON state and OFF state of each channel independently.
•Adjust LED brightness from 0–100%.
•Enable Night Mode to auto-dim LEDs after a user-defined time.
Automation features
All 20 app features are included free — no subscription.
Automation
•Schedules
•Auto-off timers
•Countdown timers
•Sunrise / sunset triggers
•Routines and scenes
•Sensor workflows
•Scene-trigger conversion
Monitoring
•Running-hours tracking — per channel
•Estimated energy cost
•ON/OFF history
•Intelligent reminders
Safety
•Safe Mode voltage protection
•Lock Room with alerts
Convenience
•NFC tag control
•Home-screen shortcuts
Reset
No reset procedure provided in the knowledge bank.
Troubleshooting
Troubleshooting
•If your plate is ROMA-format, use RPro.
•For Schneider Vihan or ZENcelo plates, the functionally identical VPro variant applies.
•If your switches are from Anchor, Legrand, GM Modular, or Havells Crabtree, your plate is almost certainly ROMA-format.
•If you have Schneider switches, choose VPro.
•A neutral wire is required at the switchboard; if your old switch only had two wires, a licensed electrician must confirm and connect neutral during installation.
•If WiFi or internet goes down, the touch panel, schedules, and auto-off timers continue to work locally.
•Local app control requires your phone and the module to be on the same WiFi network.
•If you want dimming, this module does not dim loads; use the Modular Touch Triac Dimmer for LED dimming or the Modular Touch Fan Dimmer for fan speed.
•The module is a switching module and turns loads fully on or off.
•For voltage issues, Safe Mode voltage protection auto-disconnects enrolled loads if voltage rises above 280V or drops below 200V.
•For surge events, the module is 2.5KV rated and tested up to 4KV.
FAQ
Q: What does "RPro" mean — how is it different from VPro?
RPro and VPro are functionally and spec-for-spec identical. The only difference is the plate-locking mechanism. RPro snaps into ROMA-format plates (Anchor Roma, Legrand Myrius, GM Modular, Havells Crabtree, and 25+ other Indian brands). VPro snaps into Vihan-format plates (Schneider Vihan, Schneider ZENcelo). Choose by your existing plate brand.
Q: How do I know if I have a ROMA-format plate?
If your switches are from Anchor, Legrand, GM Modular, or Havells Crabtree, your plate is almost certainly ROMA-format → choose RPro. If you have Schneider switches, choose VPro. When in doubt, check the brand name on your existing plate or contact Beakn support.
Q: Does it need a neutral wire? My old switch only had two wires.
Yes, a neutral wire is required — this applies to all Beakn Modular Touch variants. Traditional mechanical switches only need live and load; smart switches need neutral to power the electronics. Most Indian homes have neutral available at the switchboard (or junction box) even if it was never connected to the switch. A licensed electrician will confirm and connect it during installation.
Q: Does it work if my WiFi goes down?
Yes. The touch panel always works regardless of internet status. Schedules and auto-off timers run locally on the device — they don't need the cloud. Local app control works as long as your phone and the module are on the same WiFi network. Only remote access (controlling the switch from outside your home network) requires an active internet connection.
Q: How long will the touch switch last?
The capacitive panel is rated for 100,000 switching cycles. At an average of 20 actuations per day, that exceeds 13 years of use. There are no mechanical contacts or moving parts that can wear out.
Q: Can I control 2 channels independently?
Yes — both channels are fully independent. They can have different schedules, different LED colours, different auto-off timers, and different voice-command names.
Q: Can I dim lights with the Modular Touch 2?
No. The Touch 2 is a switching module — it turns loads fully on or off. For LED dimming (5W–200W), use the Modular Touch Triac Dimmer. For fan speed, use the Modular Touch Fan Dimmer.
Q: What is the surge protection rating?
The module is rated at 2.5KV and has been tested up to 4KV, protecting connected loads during voltage transients and switching surges.
Q: Can I set the LED indicator to turn off at night?
Yes. Night Mode automatically dims the LED indicators after a user-defined time, so there is no glow in the bedroom during sleep. Brightness is also manually adjustable from 0–100% at any time via the app.
Q: Is there a subscription fee for the app features?
No. All 20 app features are included free for the lifetime of the product — no monthly fee, no premium tier.
Q: Does it work with Siri, Alexa, and Google Assistant simultaneously?
Yes — the Modular Touch 2 RPro supports Google Assistant, Amazon Alexa, and Apple Siri.
Q: What is the module size?
The module dimensions are 50 × 50 × 49mm.
Q: What voltage range does it support?
The operating voltage is 110–250V AC, 50/60Hz.
Q: What is the standby power?
Standby power is < 0.8W.
Q: What warranty is included?
The product includes a 3 years warranty.