PAGE
Modular Touch 2 Rpro — product pageDesigned page · specs & gallery
Overview
Modular Touch 2 RPro
The Modular Touch 2 RPro is a 2-channel capacitive touch switch module from Beakn. It replaces an existing mechanical switch module by snapping directly into any ROMA-format modular plate — no new plate, no new wiring, no hub.
Two touch-sensitive buttons give smart control over two independent loads: app, voice, touch, or schedule, even without an internet connection.
The RPro suffix means it is engineered for ROMA-format plates — the plate-locking standard used by Anchor Roma, Legrand Myrius, GM Modular, Havells Crabtree, and 25+ other Indian modular plate brands. If your plate is from one of these brands, the RPro snaps straight in. For Schneider Vihan or ZENcelo plates, the functionally identical VPro variant applies.
What's in the box
What's in the Box
No contents were provided in the knowledge bank.
Compatibility
Compatibility
Plate compatibility
•Engineered for ROMA-format plates.
•The RPro suffix means it is for the plate-locking standard used by Anchor Roma, Legrand Myrius, GM Modular, Havells Crabtree, and 25+ other Indian modular plate brands.
•If your plate is from one of these brands, the RPro snaps straight in.
•For Schneider Vihan or ZENcelo plates, the functionally identical VPro variant applies.
Wiring compatibility
•Neutral wire is required and must be available at the switchboard.
•Most Indian residential switchboards already carry a neutral; an electrician confirms availability during installation.
•Traditional mechanical switches only need live and load; smart switches need neutral to power the electronics.
Control compatibility
•Supports Google Assistant, Amazon Alexa, Apple Siri.
•Supports Siri Shortcuts.
•Supports NFC tag control.
•Responds to touch, voice, app, and NFC.
Offline and network compatibility
•WiFi connectivity is used; no hub is required.
•The touch panel always works regardless of internet status.
•Schedules and auto-off timers run locally on the device and do not need the cloud.
•Local app control works as long as your phone and the module are on the same WiFi network.
•Only remote access from outside your home network requires an active internet connection.
Load compatibility
| Load type | Max per channel |
|---|---|
| Incandescent / resistive | 800W |
| LED | 100W or 5 units |
| Inductive | 400W |
•The Modular Touch 2 is a switching module — it turns loads fully on or off.
•For fan speed control, use the Modular Touch Fan Dimmer.
•For LED dimming, use the Modular Touch Triac Dimmer.
•For LED dimming (5W–200W), use the Modular Touch Triac Dimmer.
•Both channels are fully independent and can have different schedules, different LED colours, different auto-off timers, and different voice-command names.
Specifications
| Channels | 2 (two independent touch buttons / loads) |
|---|---|
| Touch technology | Capacitive — 100,000 switching cycles |
| Operating voltage | 110–250V AC, 50/60Hz |
| Neutral wire | Required (must be available at the switchboard) |
| Max load — incandescent / resistive | 800W per channel |
| Max load — LED | 100W or 5 units per channel |
| Max load — inductive | 400W per channel |
| Standby power | < 0.8W |
| Surge protection | 2.5KV rated; tested up to 4KV |
| LED status indicators | Customizable ON/OFF colours via app; brightness 0–100%; Night Mode auto-dims after set time |
| Module dimensions | 50 × 50 × 49mm |
| Connectivity | WiFi — no hub required |
| Offline control | Yes — touch panel, schedules, and timers work without internet |
| Voice assistants | Google Assistant, Amazon Alexa, Apple Siri |
| App features | 20 features included free — no subscription |
| Plate format | RPro — ROMA-format plates |
| Warranty | 3 years |
| Free installation | Available in 8 cities |
All 20 app features are included free — no subscription, no tier.
Schedules — turn loads on/off at set times
Auto-off timers — fire even when the switch was turned on at the panel
Countdown timers
Sunrise / sunset triggers — time-based rules tied to local daylight
Routines and scenes — group actions across devices
Sensor workflows — trigger based on sensor inputs
Scene-trigger conversion
Safe Mode voltage protection — auto-disconnects enrolled loads if voltage rises above 280V or drops below 200V
Lock Room with alerts — restrict access and receive notifications
Full offline mode — schedules and touch continue working without any internet
Running-hours tracking — per channel
Estimated energy cost
ON/OFF history
Intelligent reminders
Siri Shortcuts
Google Assistant
Amazon Alexa
NFC tag control
Home-screen shortcuts
Responds to touch, voice, app, and NFC
Set different colours for the ON state and OFF state of each channel independently (e.g. green = bedroom light on; red = geyser on)
Adjust indicator brightness from 0–100%
Night Mode — after a user-defined time, LEDs auto-dim so nothing glows during sleep
Installation
Installation
How it installs
1.Switch off the MCB for the circuit at your distribution board.
2.Remove the existing mechanical switch module from the ROMA-format plate — the plate itself stays in place.
3.Connect the wiring to the Beakn module terminals (live, neutral, and load per channel). A neutral wire must be present and accessible at the switchboard.
4.Snap the Modular Touch 2 RPro into the plate using the ROMA plate-locking mechanism.
5.Restore power, connect to the Beakn app over WiFi, and configure.
Wiring requirements
•Neutral wire is mandatory at the switchboard for all Modular Touch variants, including the Touch 2 RPro.
•Most Indian residential switchboards already carry a neutral; an electrician confirms availability during installation.
•No extra wiring, no hub wiring, no additional bus lines needed — the module connects over standard home WiFi.
Load limits to respect during wiring
| Load type | Max per channel |
|---|---|
| Incandescent / resistive | 800W |
| LED | 100W or 5 units |
| Inductive | 400W |
Mixing smart and non-smart modules
•You can install the Modular Touch 2 RPro in one slot of a multi-gang plate while keeping non-smart mechanical modules in the remaining slots.
•Any ROMA-compatible mechanism works alongside it.
•Upgrade one switch at a time — no need to replace the whole plate at once.
Free installation
•Available in 8 cities.
•Confirm availability in your city at checkout or on the Beakn website.
User Manual
Manual
Operation
•Two touch-sensitive buttons control two independent loads.
•The module responds to touch, voice, app, and NFC.
•The touch panel works even without internet.
•Schedules and timers work without internet.
•Local app control works as long as your phone and the module are on the same WiFi network.
LED indicators
•LED status indicators are customizable.
•Set different colours for the ON state and OFF state of each channel independently.
•Indicator brightness is adjustable from 0–100%.
•Night Mode auto-dims the LEDs after a user-defined time.
Automation and monitoring
•Schedules turn loads on/off at set times.
•Auto-off timers fire even when the switch was turned on at the panel.
•Countdown timers are supported.
•Sunrise / sunset triggers are supported.
•Routines and scenes group actions across devices.
•Sensor workflows trigger based on sensor inputs.
•Scene-trigger conversion is included.
•Running-hours tracking is available per channel.
•Estimated energy cost is available.
•ON/OFF history is available.
•Intelligent reminders are available.
Safety
•Safe Mode voltage protection auto-disconnects enrolled loads if voltage rises above 280V or drops below 200V.
•Lock Room with alerts restricts access and sends notifications.
•The module has 2.5KV surge protection and has been tested up to 4KV.
Notes
•The Modular Touch 2 is a switching module — it turns loads fully on or off.
•For fan speed control, use the Modular Touch Fan Dimmer.
•For LED dimming, use the Modular Touch Triac Dimmer.
•The capacitive panel is rated for 100,000 switching cycles.
Configuration
Configuration
After installation
•Restore power.
•Connect to the Beakn app over WiFi.
•Configure the module in the app.
App features included free
All 20 app features are included free — no subscription, no tier.
Automation
•Schedules
•Auto-off timers
•Countdown timers
•Sunrise / sunset triggers
•Routines and scenes
•Sensor workflows
•Scene-trigger conversion
Safety
•Safe Mode voltage protection
•Lock Room with alerts
•Full offline mode
Monitoring
•Running-hours tracking
•Estimated energy cost
•ON/OFF history
•Intelligent reminders
Convenience & Control
•Siri Shortcuts
•Google Assistant
•Amazon Alexa
•NFC tag control
•Home-screen shortcuts
LED Customisation
•Different colours for ON and OFF state of each channel independently
•Brightness from 0–100%
•Night Mode auto-dims after a user-defined time
Voice assistant support
•Google Assistant
•Amazon Alexa
•Apple Siri
Multi-channel setup
•Both channels are fully independent.
•They can have different schedules, different LED colours, different auto-off timers, and different voice-command names.
Reset
Reset
No reset procedure was provided in the knowledge bank.
Troubleshooting
Troubleshooting
Voltage protection
•Safe Mode voltage protection auto-disconnects enrolled loads if voltage rises above 280V or drops below 200V.
Internet or WiFi issues
•The touch panel always works regardless of internet status.
•Schedules and auto-off timers run locally on the device and do not need the cloud.
•Local app control works as long as your phone and the module are on the same WiFi network.
•Only remote access from outside your home network requires an active internet connection.
Wiring issues
•A neutral wire is required and must be available at the switchboard.
•If your old switch only had two wires, a neutral may still be available at the switchboard or junction box even if it was never connected to the switch.
•A licensed electrician will confirm and connect it during installation.
Plate compatibility issues
•If your plate is ROMA-format, use RPro.
•If your plate is Schneider Vihan or ZENcelo, use VPro.
Load-control limitations
•The Modular Touch 2 is a switching module — it turns loads fully on or off.
•For fan speed control, use the Modular Touch Fan Dimmer.
•For LED dimming, use the Modular Touch Triac Dimmer.
LED behavior
•LED brightness can be adjusted from 0–100%.
•Night Mode auto-dims the LEDs after a user-defined time.
Durability
•The capacitive panel is rated for 100,000 switching cycles.
•There are no mechanical contacts or moving parts that can wear out.
FAQ
Q: What does "RPro" mean — how is it different from VPro?
RPro and VPro are functionally and spec-for-spec identical. The only difference is the plate-locking mechanism. RPro snaps into ROMA-format plates (Anchor Roma, Legrand Myrius, GM Modular, Havells Crabtree, and 25+ other Indian brands). VPro snaps into Vihan-format plates (Schneider Vihan, Schneider ZENcelo). Choose by your existing plate brand.
Q: How do I know if I have a ROMA-format plate?
If your switches are from Anchor, Legrand, GM Modular, or Havells Crabtree, your plate is almost certainly ROMA-format → choose RPro. If you have Schneider switches, choose VPro. When in doubt, check the brand name on your existing plate or contact Beakn support.
Q: Does it need a neutral wire? My old switch only had two wires.
Yes, a neutral wire is required — this applies to all Beakn Modular Touch variants. Traditional mechanical switches only need live and load; smart switches need neutral to power the electronics. Most Indian homes have neutral available at the switchboard (or junction box) even if it was never connected to the switch. A licensed electrician will confirm and connect it during installation.
Q: Does it work if my WiFi goes down?
Yes. The touch panel always works regardless of internet status. Schedules and auto-off timers run locally on the device — they don't need the cloud. Local app control works as long as your phone and the module are on the same WiFi network. Only remote access (controlling the switch from outside your home network) requires an active internet connection.
Q: How long will the touch switch last?
The capacitive panel is rated for 100,000 switching cycles. At an average of 20 actuations per day, that exceeds 13 years of use. There are no mechanical contacts or moving parts that can wear out.
Q: Can I control 2 channels independently?
Yes — both channels are fully independent. They can have different schedules, different LED colours, different auto-off timers, and different voice-command names.
Q: Can I dim lights with the Modular Touch 2?
No. The Touch 2 is a switching module — it turns loads fully on or off. For LED dimming (5W–200W), use the Modular Touch Triac Dimmer. For fan speed, use the Modular Touch Fan Dimmer.
Q: What is the surge protection rating?
The module is rated at 2.5KV and has been tested up to 4KV, protecting connected loads during voltage transients and switching surges.
Q: Can I set the LED indicator to turn off at night?
Yes. Night Mode automatically dims the LED indicators after a user-defined time, so there is no glow in the bedroom during sleep. Brightness is also manually adjustable from 0–100% at any time via the app.
Q: Is there a subscription fee for the app features?
No. All 20 app features are included free for the lifetime of the product — no monthly fee, no premium tier.
Q: Does it work with Siri, Alexa, and Google Assistant simultaneously?
Yes — the Modular Touch 2 RPro supports Google Assistant, Amazon Alexa, and Apple Siri.
Q: Can I mix smart and non-smart modules on the same plate?
Yes. You can install the Modular Touch 2 RPro in one slot of a multi-gang plate while keeping non-smart mechanical modules in the remaining slots. Any ROMA-compatible mechanism works alongside it.
Q: What load limits apply per channel?
•Incandescent / resistive: 800W per channel
•LED: 100W or 5 units per channel
•Inductive: 400W per channel
Q: Does it require a hub?
No. Connectivity is WiFi — no hub required.
Q: Is free installation available?
Yes — free installation is available in 8 cities. Confirm availability in your city at checkout or on the Beakn website.