Full Glass 4 Switch + 1 Fan + 1 Socket (6M)

Q: Q: Does this panel need a neutral wire?

Yes. A neutral wire is mandatory at the board for all Full Glass variants, including this one. Most modern boards already have one; your electrician should confirm it before installation.

Q: Q: What size wall box do I need?

A 6M (6-module) wall box. If your existing box is already 6M, this is a direct replacement. If it is smaller, minor civil work to enlarge the box opening is required.

Q: Q: Does it support 3-phase supply?

Yes. The 6M panel supports both single-phase and 3-phase input. This is one of the advantages of choosing a 6M panel over the smaller 2M/3M/4M options, which are single-phase only.

Q: Q: What can I connect to the HD channel?

The HD channel carries a 20A relay rated at 2500W — suitable for air conditioners, geysers, water heaters, pumps, or any other heavy-load appliance. This panel includes 1 HD channel.

Q: Q: What fan types work with the fan channel?

The fan regulator is capacitive and supports ceiling fans up to 80W. It is not intended for exhaust fans or other non-capacitive fan types beyond the 80W limit.

Q: Q: How does the IR remote work?

The included IR remote communicates directly with the panel hardware. It does not require WiFi, the internet, or the app. This makes it reliable during outages and practical for guests or elderly users unfamiliar with smartphone apps.

Q: Q: Can I use this without a smartphone or WiFi?

Yes — the included IR remote provides direct control without WiFi or internet.

Overview

The Full Glass 4 Switch + 1 Fan + 1 Socket (6M) is a premium smart switchboard panel from Beakn's Full Glass Magnetic Touch range. It replaces your entire existing switchboard with a single seamless 3mm toughened glass surface — the same grade of glass used in smartphone screens — finished in White, Black, or Metallic Grey.

This 6-module (6M) panel combines four lighting switch channels, a dedicated fan speed regulator, and a built-in socket, making it a versatile all-in-one solution for rooms that need lighting control, a ceiling fan, and a power point at the same board location. Being a 6M panel, it supports both single-phase and 3-phase input. It ships with an included IR remote for physical control without WiFi, full app control with 20 features (no subscription), voice assistant support across all four major platforms, and carries Beakn's industry-leading 5-year warranty.

Features

Hardware & Build

•3mm toughened glass face — flat, scratch-resistant, easy to clean; no raised buttons; backlit touch zones

•Magnetic mounting — attaches to the wall box via magnets; zero visible screws; face lifts off magnetically for maintenance without tools

•Three colour options — White, Black, Metallic Grey

•Custom backlit icons — every touch zone is configured at manufacture to match its function (lights, fan, socket, scenes, room names, custom symbols); reassignable if wiring changes

•1 × HD channel — 20A relay rated to 2500W for heavy loads (air conditioners, geysers, water pumps, etc.)

•Capacitive fan regulator — smooth speed control for ceiling fans up to 80W

•Built-in socket — integrated power point on the glass panel itself

•4.5KV surge protection — highest surge rating in the Beakn range

•< 0.8W standby power — ultra-low idle consumption

Connectivity & Control

•WiFi (no hub) — connects directly to your home router; no additional gateway required

•Included IR remote — physical remote that controls the panel directly, no WiFi or internet needed; ideal for guests, elderly users, and outages

•2-way switch support — 2 two-way switch positions supported per panel for multi-point control

App — 20 Features (Free, No Subscription)

1.Schedules

2.Auto-off timers

3.Countdown timers

4.Sunrise / sunset triggers

5.Routines

6.Scenes assignable to physical touch zones

7.Sensor workflows

8.Scene-trigger conversion

9.Safe Mode voltage protection

10.Lock Room with alerts

11.Full offline mode

12.Running-hours tracking

13.Estimated energy cost

14.Full ON/OFF history

15.Intelligent reminders

16.Voice control — Google Assistant

17.Voice control — Amazon Alexa

18.Voice control — Apple Siri

19.Voice control — Apple HomeKit

20.NFC and home-screen shortcuts

LED Status & Display

•Customizable ON/OFF LED colours — set per channel via app

•Adjustable brightness — 0–100% for backlit icons

•Night Mode — auto-dims the panel after a set time

Voice & Ecosystem

•Google Assistant, Amazon Alexa, Apple Siri, Apple HomeKit — all four supported out of the box

What's in the box

What's in the Box

•Full Glass 4 Switch + 1 Fan + 1 Socket (6M) panel

•Included IR remote

Compatibility

•Phase input: Single-phase or 3-phase (supported on all 6M panels)

•Neutral wire: Required (must be available at the board)

•Connectivity: WiFi (no hub required)

•Voice assistants: Google Assistant, Amazon Alexa, Apple Siri, Apple HomeKit

•2-way switch support: 2 per panel

•Fan compatibility: Ceiling fans up to 80W

•Heavy-load compatibility: 1 × 20A / 2500W HD channel for air conditioners, geysers, water pumps, and similar heavy loads

•Socket: Built-in socket / integrated power point on the glass panel itself

Specifications

Product name	Full Glass 4 Switch + 1 Fan + 1 Socket (6M)
Module / gang size	6M
Switch channels	4
Fan channels	1
Socket	1
HD channels	1 × 20A / 2500W
Phase input	Single-phase or 3-phase (supported on all 6M panels)
Glass	3mm toughened glass (smartphone-grade)
Colours available	White, Black, Metallic Grey
Power input	240V AC, 50/60Hz
Neutral wire	Required (must be available at the board)
Max load — incandescent / resistive	800W per channel
Max load — LED	120W or 6 units per channel
Max load — inductive	400W per channel
HD channel rating	20A relay, 2500W
Fan regulator type	Capacitive
Max fan load	80W
Standby power	< 0.8W
Surge protection	4.5KV rated and tested
2-way switch support	2 per panel
Connectivity	WiFi (no hub required) + IR remote (included)
Voice assistants	Google Assistant, Amazon Alexa, Apple Siri, Apple HomeKit
Mounting	Magnetic — no visible screws
App features	20 features, free, no subscription
Warranty	5 years
Free installation	Available in 8 cities

Installation

Pre-Installation Requirements

1.Neutral wire — a neutral wire must be present at the board. This is mandatory for all Full Glass variants. Have your electrician confirm this before ordering.

2.Wall box size — the wall box must match the 6M gang size. In new construction, specify a 6M box during electrical rough-in. In existing homes, if the current box is already 6M it is a direct replacement; if smaller, minor civil work is required to resize the box.

3.Phase supply — the 6M panel accepts single-phase or 3-phase input. Confirm your supply type with your electrician.

Wiring Connections

Terminal / Channel	Load Type	Rating
Switch channels (×4)	Lights — incandescent/resistive	800W max per channel
Switch channels (×4)	Lights — LED	120W or 6 LED units max per channel
Switch channels (×4)	Inductive loads	400W max per channel
Fan channel (×1)	Ceiling fan (capacitive regulator)	80W max
HD channel (×1)	Heavy loads (AC, geyser, pump)	20A / 2500W
Socket (×1)	General power point	As per socket rating

2-Way Switching

•The panel supports 2 two-way switch positions — wire the companion switch points to the appropriate terminals for staircase / corridor multi-point control.

Mounting Procedure

1.Fix the back plate / wall box to the correct 6M gang opening.

2.Connect all wiring to the rear module terminals.

3.Attach the glass face magnetically — it clicks into place with no screws.

4.Confirm operation via the panel, then configure via the Beakn app.

5.For maintenance: lift the glass face off magnetically — no tools required.

Professional Installation

•Free installation is available in 8 cities — check Beakn's website for covered locations.

•For other locations, any qualified electrician can install using the product documentation.

User Manual

Manual

How it works

•The panel is part of Beakn's Full Glass Magnetic Touch range.

•It replaces your entire existing switchboard with a single seamless 3mm toughened glass surface.

•The glass face is mounted magnetically and has no visible screws.

•Touch zones are backlit and custom icons are configured at manufacture to match their function.

•The face lifts off magnetically for maintenance without tools.

Physical controls

•The included IR remote controls the panel directly.

•The IR remote does not require WiFi or the internet.

•It is intended to be practical for guests, elderly users, and outages.

Functions supported

•Four lighting switch channels

•One fan speed regulator

•One built-in socket

•One HD channel rated 20A / 2500W

•2 two-way switch positions supported per panel

App functions

•Schedules

•Auto-off timers

•Countdown timers

•Sunrise / sunset triggers

•Routines

•Scenes assignable to physical touch zones

•Sensor workflows

•Scene-trigger conversion

•Safe Mode voltage protection

•Lock Room with alerts

•Full offline mode

•Running-hours tracking

•Estimated energy cost

•Full ON/OFF history

•Intelligent reminders

•Voice control — Google Assistant

•Voice control — Amazon Alexa

•Voice control — Apple Siri

•Voice control — Apple HomeKit

•NFC and home-screen shortcuts

LED display

•Customizable ON/OFF LED colours per channel via app

•Adjustable brightness: 0–100% for backlit icons

•Night Mode auto-dims the panel after a set time

Configuration

•Colour options: White, Black, Metallic Grey

•App features: 20 features, free, no subscription

•LED colours: customizable ON/OFF LED colours per channel via app

•Brightness: adjustable 0–100% for backlit icons

•Night Mode: auto-dims the panel after a set time

•Custom backlit icons: every touch zone is configured at manufacture to match its function (lights, fan, socket, scenes, room names, custom symbols); reassignable if wiring changes

•Scene assignment: scenes assignable to physical touch zones

•Voice assistants: Google Assistant, Amazon Alexa, Apple Siri, Apple HomeKit

•NFC and home-screen shortcuts

Reset

•The face lifts off magnetically for maintenance without tools.

•The included IR remote communicates directly with the panel hardware and does not require WiFi, the internet, or the app.

Troubleshooting

•If there is no power or the panel does not operate, confirm that a neutral wire is present at the board; this is mandatory for all Full Glass variants.

•If the panel does not fit, confirm that the wall box is 6M; if smaller, minor civil work is required to resize the box.

•If using the panel in a 3-phase home, confirm the supply type with your electrician; the 6M panel supports both single-phase and 3-phase input.

•If WiFi is unavailable, the included IR remote still provides direct control and does not require WiFi or internet.

•For maintenance, lift the glass face off magnetically — no tools required.

FAQ

Q: Does this panel need a neutral wire?

Yes. A neutral wire is mandatory at the board for all Full Glass variants, including this one. Most modern boards already have one; your electrician should confirm it before installation.

Q: What size wall box do I need?

A 6M (6-module) wall box. If your existing box is already 6M, this is a direct replacement. If it is smaller, minor civil work to enlarge the box opening is required.

Q: Does it support 3-phase supply?

Yes. The 6M panel supports both single-phase and 3-phase input. This is one of the advantages of choosing a 6M panel over the smaller 2M/3M/4M options, which are single-phase only.

Q: What can I connect to the HD channel?

The HD channel carries a 20A relay rated at 2500W — suitable for air conditioners, geysers, water heaters, pumps, or any other heavy-load appliance. This panel includes 1 HD channel.

Q: What fan types work with the fan channel?

The fan regulator is capacitive and supports ceiling fans up to 80W. It is not intended for exhaust fans or other non-capacitive fan types beyond the 80W limit.

Q: How does the IR remote work?

The included IR remote communicates directly with the panel hardware. It does not require WiFi, the internet, or the app. This makes it reliable during outages and practical for guests or elderly users unfamiliar with smartphone apps.

Q: Can I use this without a smartphone or WiFi?

Yes — the included IR remote provides direct control without WiFi or internet.

Full Glass 4 Switch + 1 Fan + 1 Socket (6M) ✓

Specifications

FAQ