Full Glass 20 Switch (12M)

Q: Q: How many switches does the 20 Switch (12M) have?

A: 20 switch channels, all independently controllable via touch, app, voice, or IR remote. There are no fan channels or sockets in this configuration.

Q: Q: What are the HD channels and which loads should go on them?

A: There are 4 HD channels, each rated at 20A / 2500W via a high-power relay. These are designed for heavy loads — geysers, air conditioners, water pumps, HVAC units, or any appliance exceeding 800W. Standard lighting and LED loads go on the remaining switch channels.

Q: Q: Does this panel support 3-phase supply?

A: Yes. All 12M panels — including the 20 Switch — support both single-phase and 3-phase input. Your electrician will distribute loads across phases at the board.

Q: Q: Is a neutral wire required?

A: Yes — a neutral wire must be present at the board for all Full Glass variants, including this one. Most modern boards already have a neutral; your electrician confirms this during assessment.

Q: Q: What wall box size is needed?

A: The wall box must be 12M (twelve modules wide). If your existing box is already 12M, this is a direct replacement. If it is smaller, minor civil work is needed to resize the opening. In new construction, specify a 12M box during electrical rough-in.

Q: Q: How are the custom icons set up?

A: Icons are configured during manufacturing to your exact layout. You specify what each of the 20 zones controls — ceiling light, pendant, feature light, curtain, AC, geyser, room name, and more. Icons are reassignable if wiring changes.

Q: Q: Do I need WiFi for it to work?

A: WiFi is used for app connectivity, but the panel and IR remote continue working in full offline mode without internet.

Q: Q: Is installation available everywhere?

A: Free installation is available in 8 cities. For all other locations, a licensed electrician familiar with smart switch installations is recommended.

Overview

The Full Glass 20 Switch (12M) is Beakn's highest-capacity all-switch smart panel — a single 12-module-wide sheet of 3mm toughened glass that replaces your entire switchboard with a seamless, screwless surface carrying 20 individually controlled switch channels and 4 heavy-duty HD channels (20A / 2500W each).

Designed for large living rooms, open-plan spaces, home theatres, or any location with a high concentration of lighting and load circuits in one board, it delivers the full breadth of Beakn's premium glass touch experience: custom backlit icons, WiFi + IR remote dual control, 4.5KV surge protection, voice assistant integration, and all 20 app features — with no subscription, ever.

It supports both single-phase and 3-phase electrical supply, and carries the longest warranty in the Beakn line at 5 years.

Use cases

•Large open-plan living / dining areas — control ceiling lights, accent lighting, feature lighting, pendants, and more from one unified panel

•Home theatres and entertainment rooms — independent control of scene lighting, projector circuits, equipment loads, and ambience zones

•Master bedrooms with extensive lighting — bedhead lights, wardrobe lights, bathroom lights, reading lights, and automation scenes all in one board

•Luxury villas and bungalows — a single high-capacity board for an entire floor's lighting circuits

•Commercial reception / boardroom — professional-grade aesthetics with scene control and voice integration

•New construction projects — specify a 12M wall box at build stage for a clean, future-proof installation

•Retrofit of overloaded boards — consolidate a crowded multi-switch board into one seamless glass surface

•3-phase supply buildings — fully compatible; supports both single-phase and 3-phase input

•Homes with heavy loads — 4 HD channels (20A / 2500W each) handle geysers, air conditioners, pumps, or other high-draw appliances alongside 20 standard channels

What's in the box

•Full Glass 20 Switch (12M) panel

•IR remote (included)

•Magnetic glass face / screwless glass panel

Compatibility

•Supports single-phase or 3-phase input

•WiFi connectivity with no hub required

•IR remote control included

•Voice assistant integration: Google Assistant, Amazon Alexa, Apple Siri, Apple HomeKit

•2-way switches supported: 2 per panel

•No fan channels in this configuration; do not connect fan motors to standard switch channels

•0 sockets in this configuration

•Neutral wire required at the board for all Full Glass variants, including this one

•Standard channels support up to 800W per channel incandescent / resistive, 120W or 6 units per channel LED, and 400W per channel inductive

•HD channels are for heavy loads such as geyser, air conditioners, water pumps, HVAC units, or any appliance exceeding 800W

Specifications

Product name	Full Glass 20 Switch (12M)
Switch channels	20
Fan channels	0
Socket	0
HD channels	4 × 20A relay / 2500W
Module / gang size	12M (twelve modules wide)
Phase support	Single-phase or 3-phase input
Glass	3mm toughened glass (smartphone-grade)
Colours available	White, Black, Metallic Grey
Power input	240V AC, 50/60Hz
Neutral wire	Required at the board
Max load — incandescent / resistive	800W per channel
Max load — LED	120W or 6 units per channel
Max load — inductive	400W per channel
HD channel rating	20A relay, 2500W per HD channel
Standby power	< 0.8W
Surge protection	4.5KV rated and tested
2-way switches	2 per panel
Connectivity	WiFi (no hub required) + IR remote (included)
Voice assistants	Google Assistant, Amazon Alexa, Apple Siri, Apple HomeKit
Custom icons	Yes — per switch function, configured at manufacture
LED status colours	Customizable ON/OFF colours via app
LED brightness	0–100% adjustable
Night Mode	Yes — auto-dims after a set time
Mounting	Magnetic — no visible screws
App features	20, included free (no subscription)
Warranty	5 years (longest in Beakn range)
Free installation	Available in 8 cities

All 20 app features are included free — no subscription required:

1.Schedules — automate switches on a time-based schedule

2.Auto-off timers — lights or loads switch off automatically after a set duration

3.Countdown timers — set a countdown to turn any channel on or off

4.Sunrise / sunset triggers — time-linked automation that follows natural light

5.Routines — multi-step automations triggered by a single action

6.Scenes — assign scene controls to physical touch zones on the panel

7.Sensor workflows — trigger channels based on connected sensor inputs

8.Scene-trigger conversion — convert any switch zone to a scene trigger

9.Safe Mode voltage protection — powered by 4.5KV surge protection (highest in Beakn range)

10.Lock Room with alerts — restrict access to specific channels and receive alerts

11.Full offline mode — panel and IR remote continue working without internet

12.Running-hours tracking — monitor cumulative usage per channel

13.Estimated energy cost — track and forecast energy spend

14.Full ON/OFF history — complete log of every switch event

15.Intelligent reminders — context-aware usage prompts

16.Voice control — Siri, Alexa, Google Assistant, Apple HomeKit

17.NFC shortcuts — tap-to-action via NFC

18.Home-screen shortcuts — quick-access controls from device home screen

19.Night Mode — auto-dims LED backlighting after a configurable time

20.Customizable LED status colours — set unique ON/OFF indicator colours per channel via app

Additional hardware features:*

Custom backlit icons — every touch zone has a function-specific icon (light, scene, curtain, AC, geyser, room name, etc.) configured at manufacture; reassignable if wiring changes

IR remote (included) — physical remote gives full panel control with no WiFi or internet required

Magnetic mounting — face lifts off magnetically for service; zero visible screws

Installation

Pre-installation checklist

Requirement	Detail
Wall box size	Must be 12M (twelve modules wide)
Neutral wire	Must be present at the board — required on all Full Glass variants
Phase supply	Single-phase or 3-phase; both supported on 12M panels
Existing box matches 12M?	Direct replacement, no civil work needed
Existing box is smaller?	Minor civil (wall) work required to resize the box
New construction	Specify 12M wall box during electrical rough-in

Wiring notes

•Standard channels (16 of 20): Each switch channel supports up to 800W resistive / incandescent, 400W inductive, or 120W / 6 units LED load.

•HD channels (4 of 20): Rated at 20A / 2500W each via a high-power relay — wire heavy loads (geyser, AC, pump, HVAC) to HD channels.

•Neutral wire: A neutral must be run to the board. The electrician confirms this before installation. Most modern boards already have one.

•3-phase input: The 12M panel accepts 3-phase supply at the board. Ensure phase distribution across channels is handled correctly by a qualified electrician.

•2-way switching: 2-way switch functionality is supported (2 per panel) — wire as per standard 2-way loop; no additional hardware required.

•Fan channels: This configuration has 0 fan channels. Do not connect fan motors to standard switch channels; use a fan-capable panel if fan speed regulation is required.

•Mounting: Once wired, the glass face attaches magnetically — no screws are visible. The face can be lifted off magnetically for future service or maintenance without tools.

Installation support

•Free installation available in 8 cities (confirm city availability with Beakn at purchase).

•For all other locations, a licensed electrician familiar with smart switch installations is recommended.

User Manual

•Configure the panel layout at manufacture so each of the 20 zones receives the correct custom backlit icon and function assignment.

•The IR remote gives full panel control with no WiFi or internet required.

•The magnetic face can be lifted off for service or maintenance without tools.

•Night Mode can auto-dim LED backlighting after a configurable time.

•LED brightness is adjustable from 0–100%.

•LED status colours can be customized for ON/OFF states via the app.

•Full offline mode keeps the panel and IR remote working without internet.

Configuration

•Custom icons are configured at manufacture per switch function.

•Icons can represent light, scene, curtain, AC, geyser, room name, etc.

•Icons are reassignable if wiring changes.

•LED status colours are customizable ON/OFF colours via app.

•LED brightness is adjustable from 0–100%.

•Night Mode auto-dims after a set time.

•App features: All 20 app features are included free with no subscription.

•Voice control supports Siri, Alexa, Google Assistant, and Apple HomeKit.

•NFC shortcuts and Home-screen shortcuts are included.

•Scene controls can be assigned to physical touch zones on the panel.

•Scene-trigger conversion allows any switch zone to be converted to a scene trigger.

Reset

•Full offline mode: the panel and IR remote continue working without internet.

•IR remote control remains available without WiFi or internet required.

•Night Mode and other app-based settings remain app-configurable; no reset procedure was provided in the knowledge bank.

Troubleshooting

•No neutral wire at the board: A neutral must be present at the board for all Full Glass variants, including this one.

•Trying to use fan loads: This configuration has 0 fan channels; do not connect fan motors to standard switch channels.

•Using a box smaller than 12M: If the existing box is smaller, minor civil work is required to resize the opening.

•Heavy loads on standard channels: Heavy loads such as geysers, ACs, pumps, and HVAC units should be connected to the 4 HD channels (20A / 2500W each).

•3-phase supply wiring: Ensure phase distribution across channels is handled correctly by a qualified electrician.

•No internet/WiFi: The panel and IR remote continue working in full offline mode.

•Maintenance/service: The glass face lifts off magnetically for service; no tools are required.

Notes on load limits

•Standard channels support up to 800W per channel incandescent / resistive.

•Standard channels support up to 120W or 6 units per channel LED.

•Standard channels support up to 400W per channel inductive.

FAQ

Q: How many switches does the 20 Switch (12M) have?

A: 20 switch channels, all independently controllable via touch, app, voice, or IR remote. There are no fan channels or sockets in this configuration.

Q: What are the HD channels and which loads should go on them?

A: There are 4 HD channels, each rated at 20A / 2500W via a high-power relay. These are designed for heavy loads — geysers, air conditioners, water pumps, HVAC units, or any appliance exceeding 800W. Standard lighting and LED loads go on the remaining switch channels.

Q: Does this panel support 3-phase supply?

A: Yes. All 12M panels — including the 20 Switch — support both single-phase and 3-phase input. Your electrician will distribute loads across phases at the board.

Q: Is a neutral wire required?

A: Yes — a neutral wire must be present at the board for all Full Glass variants, including this one. Most modern boards already have a neutral; your electrician confirms this during assessment.

Q: What wall box size is needed?

A: The wall box must be 12M (twelve modules wide). If your existing box is already 12M, this is a direct replacement. If it is smaller, minor civil work is needed to resize the opening. In new construction, specify a 12M box during electrical rough-in.

Q: How are the custom icons set up?

A: Icons are configured during manufacturing to your exact layout. You specify what each of the 20 zones controls — ceiling light, pendant, feature light, curtain, AC, geyser, room name, and more. Icons are reassignable if wiring changes.

Q: Do I need WiFi for it to work?

A: WiFi is used for app connectivity, but the panel and IR remote continue working in full offline mode without internet.

Q: Is installation available everywhere?

A: Free installation is available in 8 cities. For all other locations, a licensed electrician familiar with smart switch installations is recommended.

Full Glass 20 Switch (12M) ✓

Specifications

FAQ