📘Step-by-step
Device Health & Maintenance
Device Health & Maintenance- Settings → Devices: Edit Device Name or Room
- Device Warranty Details
- Device Health and Signal Strength
❓FAQ
Frequently Asked Questions
Device Health & Maintenance- How do I rename a device or move it to a different room?
- How can I check if my device is still under warranty?
TUTORIAL
Change Wi-Fi Details — Update Network Credentials Across All Devices at OnceYou upgraded from BSNL to JioFiber. New router, new SSID, new password. You have 25 smart switches in the house. Reconfiguring each one individually would take an hour.
TUTORIAL
Device warrantyView the warranty status, start date, and expiry date of your Beakn devices anytime, with all warranty information available in one place.
TUTORIAL
Device health settingsCheck your device's Wi-Fi signal strength and connection history to identify network issues and maintain reliable smart home performance.
TUTORIAL
Edit device name & change device roomsettingsEdit device names and room assignments anytime without removing the device, while keeping all scenes, schedules, and automations unchanged.
What it does
Settings → Devices: Edit Device Name or Room
You can rename a device or move it to another room if it was added to the wrong one.
Device Warranty Details
You can check the warranty information for any device in the app.
Device Health and Signal Strength
This shows how well a device is connected to your Wi-Fi, so you can fix weak connections.
Reconfigure Device (Wi-Fi Setup Again)
If a device gets reset or loses Wi-Fi, you can reconnect it to your home network without losing your scenes, workflows, or schedules.
Change Wi-Fi Details
This updates the Wi-Fi name and password saved on your smart devices. When you change your home Wi-Fi, the devices need the new details to stay connected.
Additional Settings — Touch Panel (Selected Models Only)
For supported touch panels, you can adjust the panel's lights and appearance.
Options available
•Backlight Brightness — adjust how bright the panel glows.
•Adaptive Backlight Delay — the panel dims on its own after no use.
•Colour ON — set the LED colour when a switch is ON.
•Colour OFF — set the LED colour when a switch is OFF.
This lets you fully customise how the panel looks and behaves.
How to use
Settings → Devices: Edit Device Name or Room
1.Go to Settings.
2.Tap Devices.
3.Select the device from the room list.
4.Tap Edit.
5.Rename the device, or move it to another room.
6.Tap Update Details to save.
Device Warranty Details
1.Go to Settings.
2.Tap Devices.
3.Select the Room to see the device list.
4.Tap the required Device.
5.Tap Device Warranty.
You can view:
•Warranty Start Date
•Warranty Expiry Date
•Current Warranty Status (Active / Expired)
Device Health and Signal Strength
1.Go to Settings.
2.Tap Devices.
3.Select the Room to see the device list.
4.Tap the required Device.
5.Open Device Health.
You can view:
•Signal Strength — the Wi-Fi quality of the device.
•Historical Stats — the last known signal level.
•Live Status — real-time connectivity (when available).
This helps you find connection problems and place devices better.
Reconfigure Device (Wi-Fi Setup Again)
1.Go to Settings.
2.Tap Devices.
3.Select the Room to see the device list.
4.Tap the required Device.
5.Tap Configure Device.
6.Tap Go to Wi-Fi Settings.
7.Connect to the device's Wi-Fi (for example, SW_2_XXXXXXX).
8.Go back to the app and tap Confirm Connection.
9.Select your Home Wi-Fi and enter the password.
10.Tap Confirm Password.
11.Wait about 30 seconds — the device is reconfigured.
Why you may need it
•Needed if the device is accidentally reset or loses Wi-Fi.
•It reconnects the device to your home network.
•Your existing scenes, workflows, and schedules stay safe — no need to make them again.
Change Wi-Fi Details
1.Go to Settings.
2.Tap Devices.
3.Tap the Wi-Fi icon at the bottom-right corner.
4.Enter the Wi-Fi SSID (network name).
5.Enter the Wi-Fi Password.
6.Select the devices shown on the left side.
7.Tap Continue.
Why you need it
•If you change your router, Wi-Fi name, or password, all devices need the new details — otherwise they disconnect.
•Updating in the app first makes the change smooth, with no re-pairing.
•Saves time by avoiding a factory reset.
•Perfect when you upgrade to a new router (JioFiber, Airtel, TP-Link, and so on).
•Prevents downtime for your automations, schedules, and scenes.
Additional Settings — Touch Panel (Selected Models Only)
1.Go to Settings.
2.Tap Devices.
3.Select the Room.
4.Tap the required Touch Panel.
5.Open Additional Settings.
Is the device online?
A device that has lost Wi-Fi or power cannot be controlled, and it helps to be able to tell at a glance.
1.Open the app and tap Settings.
2.Tap Devices.
3.Any device showing a Wi-Fi OFF icon is offline.
4.Tap a device to open it. Device Status reads either:
•Online — connected and ready to use.
•Offline — disconnected or unreachable.
If something is not responding, check here first. It saves you resetting a device that was only waiting for the router to come back.
Schedule an action for a device that is offline
You do not have to wait for a device to come back before telling it what to do. If a switch is offline, you can queue the action and the app will carry it out the moment the device reconnects.
1.Open the app and tap Devices.
2.Open the room and tap the switch you want to control.
3.If the device is offline you will see Unable to Communicate.
4.Tap Turn ON/OFF Next Time Device is Online.
5.Choose the action you want — Turn ON or Turn OFF.
6.Confirm.
The action is saved and runs by itself as soon as the device is back on the network.
Real-life example: You are at the office and remember the bedroom geyser is on, but the power at home has gone. You queue a Turn OFF. When the power returns at 4 pm the geyser switches off before anyone gets home, instead of heating an empty tank all afternoon.
Reset instructions for any device
Every Beakn device has its own reset method, and the app carries the correct one for each so you do not have to look it up.
1.Open the app and tap Settings.
2.Tap Devices.
3.Scroll to Reset Device Instructions.
4.Select the device you want to reset.
5.Follow the steps shown on screen for that specific device.
Use this before reconfiguring a device or reconnecting it to a different Wi-Fi network.